Injection Blow Molding Machine: What Are The Precautions for Using The Injection Blow Molding Machine?

What are the precautions for using the injection blow molding machine? Do you know? Today, let’s learn about it together!

1. It cannot be operated without material, which can reduce the wear between the screw and the cylinder.

2. For the screw, it is recommended to use the IKv screw plastic injection blow molding machine. Under the same conditions, the output is higher and the plasticizing energy is stronger. When the temperature of the cylinder and the temperature of the plastic raw material are not enough, the operation cannot be carried out to prevent damage to the screws and connecting parts.

3. When there are some abnormal sounds in the injection blow molding machine, it should be stopped immediately to check risks and safety issues.

4. Do not mix garbage, impurities or metal in the filter plate. This will increase the resistance of the extruder and affect the quantity and quality of the product.

5. If the resin pressure of the filter element is high, the filter element plate may be clogged, and the filter element needs to be replaced in time. If the resin pressure monitor or display device does not show abnormalities, you can observe the changes in the main motor current and the changes in the extruded parts to determine whether they need to be replaced. If the injection blow molding machine has not been used for a long time, please turn off the cooling water switch in the screw feeding part and drain the cooling water.

6. Calibrate the temperature controller regularly and check its adjustment accuracy and control sensitivity.

7. Check the heater wiring and contactor, check the fixing device, and keep the heater and cylinder in close contact

Here are the things you need to pay attention to when performing maintenance and use of injection blow molding machines. The maintenance work and correct operation of the injection blow molding machine can not only improve the production technology efficiency of the injection blow molding machine, but also extend the time interval between machine overhauls and reduce the overall economic operation of the injection blow molding machine. Control costs.

The above are the precautions for using the injection blow molding machine introduced to you. I hope it will be helpful to you!