HUILI Injection Molding Machine
Clamp tonnage : 300 ton
Parameters:
MODEL/型号 | HL -3000 | ||
INJECTION UNIT/注塑部分 | A | B | |
Screw diameter/螺杆直径 | mm | 56 | 58 |
Shot size(theoretical)/理论注塑容积 | Cm³ | 788 | 845 |
Shot weight/理论注塑重量 | g | 709 | 760 |
Injection pressure/注塑压力 | Mpa | 178 | 166 |
Injection rate/注塑速率 | g/s | 210 | 226 |
Screw L/D ratio/螺杆长径比 | L/D | 21.6 | 21 |
Screw speed/螺杆转速 | r.p.m | 0-180 | |
Nozzle Diameter/喷嘴球径 | Srmm | 20 | |
CLAMPING/合模装置 | |||
Clamp tonnage/合模力 | KN | 3000 | |
Toggle stroke/动模板行程 | mm | 560 | |
Mould Thickness/允许模厚 | mm | 220-600 | |
Space between tie-bars/拉杆间距 | mm | 580x580 | |
Ejector stroke/顶出行程 | mm | 160 | |
Ejector tonnage/顶出力 | KN | 80 | |
Ejector number/顶出杆根数 | Piece | 9 | |
Hole Diameter/模板定位孔直径 | mm | 160 | |
By the way , Our company is about 110 km away from Shanghai(1.5 hour bus driving from shanghai airport) . Warmly welcome you to visit our factory at any time.
For choosing proper machine and saving your time, please read below questions carefully and send your inquiry soon , thanks .
1.what material you will use(PP PE or PET ?)
2.weight for plastic product
3.pictures for plastic product (including dimension for plastic product)
4.what output per hour do you need ?
5.Other requirements about the machine you want.
Home Plastic Machinery About Us Solution Service Blog Contact Us Privacy Policy