HUILI Injection Molding Machine
Clamp tonnage : 230 ton
Parameters:
MODEL/型号 | HL-2300A | ||
INJECTION UNIT/注塑部分 | A | B | |
Screw diameter/螺杆直径 | mm | 50 | 52 |
Shot size(theoretical)/理论注塑容积 | Cm³ | 608 | 658 |
Shot weight/理论注塑重量 | g | 546 | 592 |
Injection pressure/注塑压力 | Mpa | 184 | 170 |
Injection rate/注塑速率 | g/s | 160 | 176 |
Screw L/D ratio/螺杆长径比 | L/D | 22.8 | 21.9 |
Screw speed/螺杆转速 | r.p.m | 0-180 | |
Nozzle Diameter/喷嘴球径 | Srmm | 20 | |
CLAMPING/合模装置 | |||
Clamp tonnage/合模力 | KN | 2300 | |
Toggle stroke/动模板行程 | mm | 480 | |
Mould Thickness/允许模厚 | mm | 200-510 | |
Space between tie-bars/拉杆间距 | mm | 510X510 | |
Ejector stroke/顶出行程 | mm | 155 | |
Ejector tonnage/顶出力 | KN | 70 | |
Ejector number/顶出杆根数 | Piece | 9 | |
Hole Diameter/模板定位孔直径 | mm | 160 | |
Packaging & Shipping
Injection moulding machines are packed with wooden pallets, covered with plastic film; auxiliary machines and spare parts are packed with wooden boxes. The loading to containers is done according to weight balance, every package's position is fixed in containers to avoid moving. The photos of whole delivery will be sent to you for reference.
By the way , Our company is about 110 km away from Shanghai(1.5 hour bus driving from shanghai airport) . Warmly welcome you to visit our factory at any time.
Home Plastic Machinery About Us Solution Service Blog Contact Us Privacy Policy